- Home
- Emek Izrael Regional Council
- Services
- Maintenance
- Diesel particulate filter replacement
Diesel particulate filter replacement in Emek Izrael
16 companies found
- Car ServiceTire service
- Closed Will open on Wednesday at 08:00
- Gazit, Gazit
English ,Hebrew
- Car ServiceTire serviceWash station
- Closed Will open on Wednesday at 07:30
- Unnamed Road, Ginegar, Israel
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:30
- Manshiya Zabda
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:30
- Kibbutz Alonim Center, Alonim
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- עמיעוז, Kfar Hahoresh, Israel
English ,Hebrew

- ShowroomTire serviceAuto parts
- Closed Will open on Wednesday at 08:00
- Moshav Nahalal 1060000
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:30
- Unnamed Road, Mizra, Israel
- Car Service
- Closed Will open on Wednesday at 07:30
- 75, Manshiya Zabda
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- 6077 St 3, Nazareth
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- Gvat, Gvat
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- 34, HaYogev
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:30
- 73
English ,Hebrew
Diesel particulate filter replacement
The diesel particulate filter must be replaced when it is “clogged”. The following signs indicate that the particulate filter is defective: unstable engine idling, a drop in engine power while driving, increased fuel consumption, oil level increase and malfunction signals coming from an on-board computer. The modern cars have a filter cleaning function that does not prevent the filter from clogging after a certain mileage, in which case, such a filter can be washed using special equipment. If washing does not help, the filter is replaced with a new one. Depending on the model, the filter is changed in different ways, but, as a rule, it is required to remove the engine casing, the microfilter housing, the unit protection panel, and the filter mounts. The installation of the filter is carried out in the reverse order.