- Home
- Tel Aviv District
- Services
- RAM
- Air conditioning and heating
- Compressor repair
Compressor repair for RAM in Tel Aviv District
50 companies found
Garage Ha'Mair Tel Aviv
- Car Service
- Closed Will open on Sunday at 07:00
- Derekh Ben-Zvi 11, Tel Aviv-Yafo
English ,Hebrew

Alex Car Electric
- Car Service
- Closed Will open on Sunday at 07:30
- Maskit St 15, Herzliya
English ,Hebrew ,Russian
Front Yafo 2000
- Car Service
- Closed Will open on Sunday at 08:00
- פרונט יפו 2000
English ,Hebrew
Ha`Mechonen
- Car Service
- Closed Will open on Sunday at 07:30
- Yisra'el Bak St 24, Tel Aviv-Yafo
English ,Hebrew
Nahum Gili Garage
- Car Service
- Closed Will open on Sunday at 08:00
- Ha-Melakha St 52, Holon
English ,Hebrew

Garage Admiral
- Car Service
- Closed Will open on Sunday at 07:30
- HaRabi MiBachrach St 11, Tel Aviv-Yafo, Israel
English ,Hebrew
Tiv Shelek
- Car Service
- Closed Will open on Sunday at 08:00
- HaMasger St 7, Ramat Hasharon
English ,Hebrew
Air Car EL
- Car Service
- Closed Will open on Sunday at 08:30
- Derech Menachem Begin 154, Tel Aviv-Yafo
MM Yarkoni
- Car Service
- Closed Will open on Sunday at 08:30
- Ha-Kishor St 12, Holon
English ,Hebrew
Radiatorim I.SH.
- Car Service
- Closed Will open on Sunday at 08:00
- HaPeled St 44, Holon
English ,Hebrew
Shem Tov
- Car Service
- Closed Will open on Sunday at 07:30
- Khoma u-Migdal St 28, Tel Aviv-Yafo
English ,Hebrew
Garage Or Hai
- Car Service
- Closed Will open on Sunday at 08:00
- HaRav Kahanman St 147, Bnei Brak
English ,Hebrew
Compressor repair
Compressor repair
It may be required to repair the compressor in the presence of the following signs: hum and humming sound in the engine compartment with the engine running and the air conditioning system turned off, as well as non-initiating of the electromagnetic clutch when the voltage is correctly applied. To repair the compressor, all tubes and wires are disconnected, the compressor itself is removed, the pressure clutch is removed, the housing is disassembled and the cylinder block is separated, the valve group and the piston group are removed. During the repair, all elements are washed, and if they are worn out, they are replaced, rubber gaskets are also replaced. After assembly, a lubricant is poured into the compressor.