Pump replacement in Beer Sheva

Pump replacement

Signs of a failing pump include extraneous noise, pump pulley play, leakage, and antifreeze smell. The pump failure can be caused by improper mounting, significant increase in engine temperature, faulty bearing, and seal failure. In all of these cases, the pump is to be replaced. In order to replace the pump in an 8-valve system, remove the cover from the timing belt, if necessary, remove the tension roller, remove the alternator and timing belts, disconnect the pump hose, drain the antifreeze, remove the protective cover and pump. In order to remove the pump in a 16-valve system, first, remove the right wheel, and then follow the above-mentioned steps applicable for the 8-valve system. In order to install a new pump, perform the actions in the reverse order.