- Home
- Bnei Brak
- Services
- Maintenance
- Cabin filter replacement
Cabin filter replacement in Bnei Brak
48 companies found
- Car Service
- Closed Will open on Wednesday at 07:00
- Ha-Yarkon St 69, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:00
- Barukh Hirsch St 26, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:30
- Metsada St 8, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- Ha-Yarkon St 27, Bnei Brak
Hebrew
- Car Service
- Closed Will open on Wednesday at 07:30
- Barukh Hirsch St 9, Bnei Brak
English ,Hebrew
- ShowroomCar Service
- Closed Will open on Wednesday at 07:00
- ניל״י 1 פינת, Bar Kochva St 14, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:30
- Metsada St 14, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 08:00
- Barukh Hirsch St 9, Bnei Brak
English ,Hebrew ,Russian
- Car Service
- Closed Will open on Wednesday at 08:00
- Rashi St 8, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:00
- HaRav Dangur St 41, Bnei Brak, Israel
English ,Hebrew
- Car Service
- Closed Will open on Wednesday at 07:00
- HaHashmona'im St 7, Bnei Brak
English ,Hebrew
- Car ServiceAuto parts
- Closed Will open on Wednesday at 08:00
- Barukh Hirsch St 21, Bnei Brak, Israel
English ,Hebrew
Cabin filter replacement
The cabin filter should be replaced in the presence of the following signs: poor performance of the heating and air conditioning system, unpleasant odors inside the car, foggy windows during rain. To replace the cabin filter located in the glove compartment, remove the cover at the rear and remove the old filter. If the filter is under the glove compartment, then first remove the mounting bolts, mat and cover, then remove the cleaner. If the filter is under the hood, then first remove the rubber seal, then the grill and clips of the filtering device. If the filter is under the dashboard, remove the panel, turn on the car air conditioner at maximum power, remove the control unit and the flap, after which remove the filter cap and the filter. The installation of a new filter is carried out in the inverse order.