- Home
- Bnei Brak
- Services
- Maintenance
- Diesel particulate filter replacement
Diesel particulate filter replacement in Bnei Brak
48 companies found
- Car Service
- Closed Will open on Sunday at 07:30
- Barukh Hirsch St 4, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- HaRav Kahanman St 137, Bnei Brak
English ,Hebrew
- ShowroomCar Service
- Closed Will open on Sunday at 07:00
- Barukh Hirsch St 10, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- Snir St 8, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:30
- Barukh Hirsch St 11, Bnei Brak, Israel
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Barukh Hirsch St 28, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- Barukh Hirsch St 9, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- HaRav Dangur St 41, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:00
- Barukh Hirsch St 26, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Ha-Yarkon St 66, Bnei Brak
Hebrew
- Car Service
- Closed Will open on Sunday at 07:00
- Ha-Yarkon St 69, Bnei Brak
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- HaRav Kahanman St 139, Bnei Brak
English ,Hebrew
Diesel particulate filter replacement
The diesel particulate filter must be replaced when it is “clogged”. The following signs indicate that the particulate filter is defective: unstable engine idling, a drop in engine power while driving, increased fuel consumption, oil level increase and malfunction signals coming from an on-board computer. The modern cars have a filter cleaning function that does not prevent the filter from clogging after a certain mileage, in which case, such a filter can be washed using special equipment. If washing does not help, the filter is replaced with a new one. Depending on the model, the filter is changed in different ways, but, as a rule, it is required to remove the engine casing, the microfilter housing, the unit protection panel, and the filter mounts. The installation of the filter is carried out in the reverse order.