- Home
- Jerusalem District
- Services
- Maintenance
- Diesel particulate filter replacement
Diesel particulate filter replacement in Jerusalem District
222 companies found
- Car Service
- Closed Will open on Sunday at 08:30
- Baqa al-Gharbiyye
English ,Hebrew

- Car Service
- Closed Will open on Sunday at 07:30
- Ofira St 16, Maale Adumim
English ,Hebrew
- Car Service
- Closed Will open on Friday at 08:00
- HaRechev St 36, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Friday at 08:30
- HaTa'asiya St 1, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Atsmona/Sadot, Ma'ale Adumim
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Beit ha-Yotser St 8, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:30
- Beit ha-Yotser St 8, Jerusalem
English ,Hebrew

- Car Service
- Closed Will open on Sunday at 07:30
- HaRechev St 22, Jerusalem
Hebrew ,Russian
- Car Service
- Closed Will open on Friday at 08:30
- Smadar St 136, Bet Shemesh
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Jama Abadin, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Ha-rav Aharon Kotler St 13, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 09:00
- HaPalmach St 1, Jerusalem
English ,Hebrew
Diesel particulate filter replacement
The diesel particulate filter must be replaced when it is “clogged”. The following signs indicate that the particulate filter is defective: unstable engine idling, a drop in engine power while driving, increased fuel consumption, oil level increase and malfunction signals coming from an on-board computer. The modern cars have a filter cleaning function that does not prevent the filter from clogging after a certain mileage, in which case, such a filter can be washed using special equipment. If washing does not help, the filter is replaced with a new one. Depending on the model, the filter is changed in different ways, but, as a rule, it is required to remove the engine casing, the microfilter housing, the unit protection panel, and the filter mounts. The installation of the filter is carried out in the reverse order.