- Home
- Jerusalem District
- Services
- Engine
- Turbine replacement
Turbine replacement in Jerusalem District
200 companies found
- Car Service
- Closed Will open on Sunday at 07:30
- HaOrgim St 17, Be'er Sheva
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- HaOfeh St 4, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- Prigan St 5, Ma'ale AdumimPrigan St 5, Ma'ale Adumim
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- HaTa'asiya St 10, Jerusalem
Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- Ma'ase Khoshev St 8, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- Beit Ha-Defus St 29, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- HaUman St 19, Jerusalem
English ,Hebrew
- Car ServiceCar test
- Closed Will open on Sunday at 08:00
- Yig'al Alon Ave 34, Beit Shemesh
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Jama Abadin, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 07:30
- General Pierre Koenig St 40, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Jama Abadin, Jerusalem
English ,Hebrew
- Car Service
- Closed Will open on Sunday at 08:00
- Shorah-Naham 9, Beit Shemesh, Israel
English ,Hebrew
Turbine replacement
A turbine failure is indicated by such signs as black, gray or blue color of exhaust gases, noise and engine overheating, an increase in fuel and oil consumption, and a reduced thrust. Before replacing the turbine, thoroughly wash the engine, with the oil drained, from its residues; disconnect the breather; remove the tubes for the intake and removal of oil from the turbine; remove and clean air pipes; remove the intercooler; extract the damaged turbine. After dismantling, proceed with the installation of a new turbine: install an oil filter, pour clean oil; install an intercooler and elements, install a new turbocharger, connect the oil drain pipe from the turbocharger; fill the turbine with oil; connect the oil supply pipe to the turbine, connect a new air filter, fix the necessary pipes, start the engine at idle speed and check that there are no leaks.