- Home
- Tel Aviv District
- Services
- Brake system
- Handbrake cable replacement
Handbrake cable replacement in Tel Aviv District
389 companies found
Garage Amos
- Car Service
- Closed Will open on Wednesday at 08:00
- Ha-Yarkon St 66, Bnei Brak
English ,Hebrew
Tushiya, Tel Aviv
- Car Service
- Closed Will open on Wednesday at 07:30
- HaAhim MiSlavuta St 9, Tel Aviv-Yafo
English ,Hebrew
Garage Ha-Yosemim
- Car Service
- Closed Will open on Wednesday at 07:30
- Ha-Yozmim St 6, Or Yehuda, Israel
English ,Hebrew
R.R.AMG Service Center
- Car ServiceEvacuatorWash station
- Closed Will open on Wednesday at 08:00
- Emek Brakha St 8, Tel Aviv-Yafo
English ,Hebrew
A. Team
- Car Service
- Closed Will open on Wednesday at 09:00
- HaTnufa St 9, Tel Aviv-Yafo
English ,Hebrew
Garage Lior
- Car Service
- Closed Will open on Wednesday at 08:00
- HaMasger St 24, Ramat Hasharon
English ,Hebrew
Speed Bike
- ShowroomCar Service
- Closed Will open on Wednesday at 07:00
- Yitzhak Sadeh St 25, Tel Aviv-Yafo
English ,Hebrew
Shimon Arbiv
- Car Service
- Closed Will open on Wednesday at 08:00
- Ha-Yozmim St 3, Or Yehuda
English ,Hebrew
Garage Megan
- Car Service
- Closed Will open on Wednesday at 08:00
- Tushiya St 20, Tel Aviv-Yafo
English ,Hebrew
Hiluh Shishi - Ben-Zvi, TA
- Car Service
- Closed Will open on Wednesday at 07:30
- Derekh Ben-Zvi 9, Tel Aviv-Yafo
English ,Hebrew
Sitiman
- Car Service
- Closed Will open on Wednesday at 08:00
- Uzi'el St 47, Ramat Gan
English ,Hebrew
Ha`Shlosha
- Car Service
- Closed Will open on Wednesday at 07:30
- Golomb St 46, Tel Aviv-Yafo
English ,Hebrew
Handbrake cable replacement
Handbrake cable replacement
A failure of the handbrake can be brought to your attention by the corresponding indicator on the dashboard. Plus, the parking brake is checked on a slope of 25%, and if the handbrake does not hold the car, then it is faulty, which can be caused by the defective cables. In this case, the cables must be replaced, for example, in this order: remove the rear wheels, brake drums and all the cables, after which first remove the tip of one cable, and then the tip of another cable from the equalizer. Extract the cables from the rear wheel guard. Install the cables in the reverse order.